Extended Well for 223/556 are here

Discussion in 'CrossHair Precision LLC' started by robert lynch, Apr 19, 2016.

  1. robert lynch CrossHair Precision Industry Partner

    Member Since:
    Feb 11, 2014
    Message Count:
    586
  2. robert lynch CrossHair Precision Industry Partner

    Member Since:
    Feb 11, 2014
    Message Count:
    586
    Hi Guys,

    Mike and do appreciate your patience, it has been a long time coming for sure. As stated above we did find that some of the stocks do vary a touch. One of mine fit without any sanding at all and the other required only a small amount in the corners. The finish is the same anodizing and hard coat as our other parts. Also we offer the same money back if your not happy policy as our other parts. The Mag well works and performs awesome, feeding is spot on with every Mag that we have tried. I loaded up a mag an ran through them as fast as I could and feeding was smooth and no jamming. These are going to sell for 80.00 shipped and will be sent in a priority USPS flat rate box. If you have any questions please let me know.

    Thank you as always Rob
    crashermike likes this.
  3. Denny L New Member

    Member Since:
    Feb 18, 2015
    Message Count:
    27
    Any chance a 7.62 is in the works.
    jason.hayes3 likes this.
  4. tevan0707 Member

    Member Since:
    Feb 27, 2015
    Message Count:
    81
    How would we go about ordering one of these? Also, is there a list of other parts you offer?
  5. robert lynch CrossHair Precision Industry Partner

    Member Since:
    Feb 11, 2014
    Message Count:
    586
    Denny, we have talked about one for the 7.62, but haven't started anything as of yet.

    Rob

    Sent from my 0PJA2 using Tapatalk
    jason.hayes3 and Benson X like this.
  6. robert lynch CrossHair Precision Industry Partner

    Member Since:
    Feb 11, 2014
    Message Count:
    586
    Tevan,

    At this time I have in stock Mag wells and extractor kits for the 223/556. I have on order trigger guards and more extended releases as well. You can order right here just by sending me a pm and I will send you the details.

    Rob

    Sent from my 0PJA2 using Tapatalk
  7. tevan0707 Member

    Member Since:
    Feb 27, 2015
    Message Count:
    81
    Perfect! How well do they work with Pmags?
  8. robert lynch CrossHair Precision Industry Partner

    Member Since:
    Feb 11, 2014
    Message Count:
    586
    Tevan,

    They work perfectly with every Mag we have tested. The pmag was the main one we used.

    Rob

    Sent from my 0PJA2 using Tapatalk
  9. Denny L New Member

    Member Since:
    Feb 18, 2015
    Message Count:
    27
    Rob put me on the list for a 7.62
    jason.hayes3 likes this.
  10. robert lynch CrossHair Precision Industry Partner

    Member Since:
    Feb 11, 2014
    Message Count:
    586
    Denny I will do.

    Thanks Rob

    Sent from my 0PJA2 using Tapatalk
    jason.hayes3 likes this.
  11. Benson X Member

    Member Since:
    May 4, 2015
    Message Count:
    42
    Eagerly awaiting the .308 version as well.

    Thanks Rob!
    jason.hayes3 likes this.
  12. inerlogic New Member

    Member Since:
    Oct 22, 2014
    Message Count:
    13
    AWESOME, PM to be sent..... i live behind the iron curtain in the People's Republic of Massachusetts, what is a "P-Mag?"

    ;)

    will add the extractor kit and extended well to my extended release and trigger guard.
    been waiting on these so i can work up a custom load...
    i feel bad, i tell everyone how great the rifle is... then mention all the parts i've had to replace ;)
  13. yojoe007 New Member

    Member Since:
    Mar 28, 2016
    Message Count:
    3
    Hi Robert,

    Hoping you can put me on the list for an extractor kit, trigger guard, and extended magazine release for the 223/556? Will PM you also.

    Cheers,

    James
  14. inerlogic New Member

    Member Since:
    Oct 22, 2014
    Message Count:
    13
    Rob: sent a PM, did it come through?
    looking for a total for a magwell and extractor and shipping to 02719
  15. Vinniy Mark it zero dude.

    Member Since:
    Jun 2, 2016
    Message Count:
    2
    Looks great! Would you also be a source for an extended mag release? I know I have seen one offered some time ago but don't remember where.

    Thanks,
    Vinniy
  16. Bolt B'tard New Member

    Member Since:
    Jun 14, 2016
    Message Count:
    7
    Hmm… seems I may have been asking my questions in the wrong places.
    Anyway, I'm interested in your magwells as well as the extended mag release and trigger guards.
    I'd need to get prices and availability. Also, do you ship to Canada?
    Much appreciated.

    Thanks
    BB.
  17. telemike New Member

    Member Since:
    Jun 17, 2016
    Message Count:
    2
    How is the installation? Easy?
  18. tevan0707 Member

    Member Since:
    Feb 27, 2015
    Message Count:
    81
    If you have the laminate stock you may have to remove some material from the from of the mag well cut out. But other then that it's a simple installation.

    One thing though, with the original design it doesn't allow you to remove the bolt. I brought it up to them and they said they are looking into the design to allow the bolt to be removed.
    SteveG75 likes this.
  19. BakonShoot Member

    Member Since:
    Jun 25, 2015
    Message Count:
    42
    Not only the laminate stock, but the painted/coated solid wood stock, like on the MVP-LR. As you say, a few minutes w/ a round file is all it takes for a nice snug fit.

    Tevan, are you talking about the CHP's .223 mag-well? Just now checked to make sure, but I haven't seen any issue removing the bolt on my .223 LR w/ the new CHP metal, as far as I can see. What issues did you have?

    Bryan
  20. kolafallarn New Member

    Member Since:
    Sep 23, 2013
    Message Count:
    6

    Hi,do you still ship to sweden,i have bought from you Before! i really would like to buy the 223 mag well.

    Regards örjan..

Share This Page